Clearance
|
Non-IC housings require a minimum clearance of 3" from thermal insulation and 1/2" from adjacent building components. |
Socket
|
Low voltage bi-pin socket with heat shield |
Mounting
|
Four high tension tempered steel springs secure remodel housing to ceiling. |
Junction Box
|
Prewired 15 cubic inch 0.060" thick galvanized steel, with six 1/2" knockouts. |
Lamp
|
20W-75W 12V MR16 (sold separately) |
Required Power Supply
|
Magnetic - Thermally protected, single tap input voltage available in 120V 60Hz 50 Watts. |
Dimmable
|
Use magnetic low voltage dimming control with magnetic transformer or electronic low voltage dimming control with electronic transformer. |
Labels and Listings
|
- cULus Listed for Damp Location w/ Feed Through. - cULus Wet Listed (Only with designated trims). - Meets or exceeds ASTM-283 Air-Tight Requirements (Air-Tight Housings only). - Washington State Approved (Air-Tight Housings only). - CA Title 24 Compliant. |
Dimension
|
13.5" L x 4.25" W x 5.5" H |