Close
0 items
You have no items in your shopping cart.
OUR LED PRODUCTS
    Filters
    Preferences
    Search

    LED RGB CLIPTIGHT Splice Power Feed

    $4.95
    LED RGB CLIPTIGHT Splice Power Feed is easy to use with LED RGB Tape Light systems. The 10mm Power Clip Connector with 5.5" Splice Power Feed allows the LED RGB tape light to insert into the connector and seat properly under the terminals. Solderless clip connector allows for easy configuration of your LED RGB Tape Lighting system.
    SKU: STVO12PF-RGB-10

    Step 1 Dezigns LED RGB CLIPTIGHT Splice Power Feed kit fits 5050 RGB LED Tape Lights with a 10mm width, 4-pin connection. The connector end of the power feed is made from PBT heat resistant material, it protect the led strip from high temperature. No screw terminals, simply slide in the tape light and clamp down. 

    Installation Instructions: 

    1.  Open the clip on the side
    2.  Slide the 10mm LED RGB tape light inside the clip underneath the contact prongs
    3. Make sure the side of the LED Tape light aligns with the "+ -" polarity
    4. Close the connector clip
    *
    *
    *

    Step 1 Dezigns LED RGB CLIPTIGHT Splice Power Feed kit fits 5050 RGB LED Tape Lights with a 10mm width, 4-pin connection. The connector end of the power feed is made from PBT heat resistant material, it protect the led strip from high temperature. No screw terminals, simply slide in the tape light and clamp down. 

    Installation Instructions: 

    1.  Open the clip on the side
    2.  Slide the 10mm LED RGB tape light inside the clip underneath the contact prongs
    3. Make sure the side of the LED Tape light aligns with the "+ -" polarity
    4. Close the connector clip