Close
0 items
You have no items in your shopping cart.
SHOP BY CATEGORY
    Filters
    Preferences
    Search

    LED Drivers 24V DC

    View as Grid List
    Sort by

    Plug In Power Supply 24W

    $17.50
    The Plug In Power Supply for STDC-311BPS Series convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to LED Lumastrip Light with the 6 Ft length power cord.

    LED Pre-Wired Driver 60W 24VDC

    $27.50

    This regulated 24VDC 60W Pre-Wired Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recess.


    This LED driver convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 24V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • UL Listed, CE and FCC approved

    LED Pre-Wired Class 2 Driver 60W 24VDC

    $34.00

    This regulated LED Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.


    This LED driver convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 24V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • Class II Double Insulation
    • UL Listed, CE and FCC approved

    LED Pre-wired Driver 100W 24VDC

    $39.38

    This regulated 24VDC 100W Pre-Wired Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recess.


    This LED driver convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 24V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • UL Listed, CE and FCC approved

    LED Pre-Wired Class 2 Driver 100W 24VDC

    $48.40

    This regulated 24VDC 100W Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.


    This LED driver convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 24V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • Class II Double Insulation
    • UL Listed, CE and FCC approved

    LED Dimmable Driver 40W 24VDC

    $80.08
    The Class 2 LED Dimmable Driver can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

    LED Dimmable Class 2 Driver 96W 24VDC

    $120.65
    Step 1 Dezigns LED Dimmable Class 2 Driver is designed to operate with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch. Encased in a low profile aluminum enclosure that includes 2 knock-outs to enable easy installation makes it the perfect choice for under cabinet lights, tape lights and various LED fixtures installations.
    Our electrical specification includes Auto Reset, over current and short circuit protection. Efficiency of 90% and higher allows the driver to operate at low temperatures.

    • • Dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch
    • • Super durable and compact ALUMINUM case
    • • UL 8750
    • • Nema 3R - Outdoor use
    • • Auto-Reset Protection for short circuits & over-voltage
    • • FCC 15 part 2
    • • 24V DC True RMS

    LED Dimmable Driver 100W 24VDC

    $91.00
    The Class 2 LED Dimmable Driver can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

    LED Dimmable Driver 150W 24VDC

    $100.10
    The Class 2 LED Dimmable Driver can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated for Indoor and Outdoor Use. Primary manually reset circuit breaker is standard. Two section bobbin provides complete insulation between primary and secondary sides. Encapsulated with polyester resin for whisper quiet operation. Small dimensions and weight saves space and lowers an installation cost. The outdoor enclosure rated NEMA 3R or IP24.

    LED Driver 10W 24VDC

    $19.87
    This 10-watt 24v DC LED driver will power your LED lighting fixtures and it has overload, short circuit, and over heat protection.

    LED Driver 20W 24VDC

    $35.50
    This 20-watt 24v DC LED driver will power your LED lighting fixtures and it has overload, short circuit, and over heat protection.

    LED Hardwire Driver 100W 24VDC

    $96.60
    The LED Class 2 Constant Voltage Driver 100W can supply 24V DC voltage to any kind of low voltage LED fixtures. Rated IP66.

    LED Single Channel Driver 75W 24VDC

    $40.68
    LED Single Channel Driver is a 75W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 85-264 VAC input, it provides an output voltage line of 24V.

    It has high efficiency up to 91.5%, the design of metallic mesh case enhances the heat dissipation of STVOFL7524 that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.3W), it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

    • Universal AC Input/ Full Range
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit / Overload/ Over Voltage
    • Cooling by free air convection
    • Miniature size and ultra low profile
    • Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
    • High efficiency, Long life and high reliability

    LED Single Channel Driver 100W 24VDC

    $41.25
    LED Single Channel Driver is a 100W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 100-240VAC input, it provides an output voltage line of 24V.

    The LED Single Channel Driver has high efficiency up to 91%, the design of metallic mesh case enhances the heat dissipation of STVOFL10024D that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.3W), it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

    • Universal AC Input/ Full Range
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit / Overload/ Over Voltage
    • Cooling by free air convection
    • Miniature size and ultra low profile
    • Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
    • High efficiency, Long life and high reliability

    LED 2-Channel Driver 150W 24VDC

    $52.50
    LED 2 Channel Driver is a 150W 2-Channel enclosed type power supply with low profile design. Adopting the full range 85-132VAC/170-264VAC input by switch, it provides an output voltage line of 24V.

    It has high efficiency up to 91%, the design of metallic mesh case enhances the heat dissipation of STVOFL15024D that the driver operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption, it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

    • AC input range selectable by switch
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit / Overload/ Over Voltage
    • Cooling by free air convection
    • Miniature size and ultra low profile
    • Compliance to IEC/EN 60335-1(PD3) and IEC/EN61558-1, 2-16 for household appliances
    • High efficiency, Long life and high reliability

    LED 3-Channel Driver 350W 24VDC

    $88.12
    LED 3 Channel Driver is a 350W enclosed type power supply with low profile design. Adopting the full range 90-132VAC/180-264VAC input by switch, it provides an output voltage line of 24V.

    It has high efficiency up to 88%, the design of metallic mesh case enhances the heat dissipation of STVOFL32024D that the driver operates from -25°C through 70°C under air convection with a fan. Delivering an extremely low no load power consumption, it allows the end system to easily meet the worldwide energy requirement. It has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations. The driver serves as a high price-to-performance power supply solution for various industrial applications.

    • AC input range selectable by switch
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit / Overload/ Over Voltage/ Over Temperature
    • Forced air cooling by built-in DC fan
    • Ultra low profile
    • High efficiency, Long life and high reliability

    LED Drivers 24V DC

    ... ...