Close
0 items
You have no items in your shopping cart.
SHOP BY CATEGORY
    Filters
    Preferences
    Search
    RSS

    New products

    LED Emergency Backup Battery

    $159.48
    The LED Lamp emergency backup battery work with all the LED light fixtures which the input voltage is AC120V, powering the AC driver of the led lights.The output voltage of emergency equipment is 170V DC which equals to 120V AC.The LED Lamp Emergency Backup Battery from Step 1 Dezigns is a UL Recognized LED Lighting Emergency equipment that allows the same LED fixture to be used for both normal and emergency operation. In the event of a power failure, the LED Lamp Emergency equipment switches to the emergency mode and operates the existing fixture for up to 90 minutes. The unit contains a battery, charger, and converter circuit in a single can and is available in use with an LED lamp load up to 18W at a rated voltage of 170VDC.

    • • Long life high temperature recyclable Ni-Cad Battery
    • • Includes test switch and charge indicator accessory kit
    • • For use with switched or unswitched light fixtures
    • • Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting

    LED Dedicated PAR16 Bulb

    $14.68
    Make your space a little brighter in a flash with our new Dedicated LED PAR16 Bulb. At step1dezigns.com, we have a great selection for you to choose from. It fits 3" or 4" Retrofit Can Trims directly. Available in 5000k Cool White or 3000k Warm White color temperature. PAR16 LEDs means you can enjoy brilliant illumination for up to 50,000 hours. For quality products you can count on at the lowest prices available, step1dezigns.com is the ultimate online lighting store.

    • • Consumes 80% less energy than standard halogen lamps
    • • No ultraviolet or infrared radiation
    • • UL, ROHS, and California Title 24 Compliant
    • • Low heat emission

    LED 1' x 4' Dimmable Panel Light 40W

    $109.81
    The LED 1' x 4' Rectangle Panel Light 40W Recessed Ceiling Panel Light Fixture is perfect for office, hallway, living room, meeting room, store, super market, exhibition, or other home and commercial use. LED Driver is included for Easy Installation.

    • • Durable and Bright LED
    • • Fast Heat Dissipation
    • • Energy Efficient
    • • No Flickering, Even and Soft Lighting
    • • Easy Installation
    • • Dimmable on 0-10V dimmers
    • • UL, cUL, DLC Certificate

    LED Converter 350mA to 12V DC - 1-3W

    $18.50
    Our LED Converter have an input of 350mA and output of 12V DC.

    Their fully encapsulated form-factors are small enough for any size OEM fixture. They are ideal for Indoor lighting applications. It is compatible with our STDC133 or STDC134 LED Under Cabinet Light fixtures, see related products.

    The LED Converter is compatible to run 1 pc of our STDC141/3, STDC133, or STDC134. It is also compatible to run 1-2pcs of our STDC140/1, STDC140/1A, or STDC131 light fixtures. See related products.

    • • 12-34V Input, 3-9V Output
    • • Energy Efficient LED Converter
    • • Super Compact Casing
    • • Withstands Dry Conditions

    Smart Lighting In-Wall Dimmer Kit

    $239.00
    The Lutron Caséta Smart Bridge and free app makes it remarkably easy for you to set up, control, and monitor Caséta Wireless dimmers and Serena Remote Controlled Shades from your iPhone, iPad, or even your Apple Watch. This kit provides everything you need, including the Caséta Wireless Smart Bridge, Caséta Wireless in-wall light dimmers, and Pico remote controls. For maximum convenience the Caséta bridge also works with Apple HomeKit-enabled products, Nest, select Honeywell Thermostats, Logitech Harmony remotes, and more.

    Now you can schedule lights to adjust automatically based on the time of day, or create your favorite scenes that adjust multiple lights and shades with the press of a button. Enable geofencing to automatically turn your lights on/off when you leave or approach home, or to notify you that you left your lights on.

    This Kit includes 1 Lutron Caséta Wireless Smart Bridge, 2 Lutron Caséta Wireless in-wall dimmers, 2 Lutron Pico remote controls, 2 tabletop pedestals, 2 single-gang Claro wallplates, 1 Power supply for Smart Bridge, and 1 Ethernet cable for connecting Smart Bridge to your router.

    Smart Bridge with HomeKit Technology

    $140.62
    The Smart Bridge and App for Caséta Wireless are the perfect foundations for creating a connected home system. Monitor and control lights (as well as shades and temperature) from anywhere, so you can always be in touch with your home with or without an internet connection.

    It takes just a few minutes to install your Caséta Wireless lighting control system. And once you have got your system up and running you can seamlessly expand beyond lighting to other connected home solutions.

    The system can be expanded and integrated with best-in-class products available from partners like Apple, Xfinity, Nest, and the Echo “Alexa” from Amazon to incorporate the best Smart Home technology into your home.

    Caséta Wireless features Lutron’s patented Clear Connect® technology, which sets the bar for reliable wireless performance. Its quiet frequency band is free of interference, so your Caséta Wireless dimmers are not affected by other wireless products. It just works!

    - Enables control of lights, shades, and temperature with Lutron App
    - Maximum number of connected devices: 50
    - Clear Connect® ultra-reliable wireless technology
    - Apple® HomeKit-enabled – control lights and shades with Siri®

    Lutron Caseta Wireless Plug-In Smart Dimmer Switch

    $75.00
    Caséta Wireless Plug-In Lamp Dimmer with Pico Remote Control Kit. Conveniently create just the right with this no-wiring required starter kit. The plug-in lamp dimmer simply plugs into a standard outlet, can be used with up to two lamps, and works with dimmable LEDs and CFLs, as well as incandescent or halogen bulbs. The kit also includes a Pico remote control to conveniently turn lights on/off as well as brighten or dim them. The Caséta Wireless plug-in Smart Dimmer Switch can also be controlled from a smart phone when used with the Lutron R Smart Bridge (Sold Separately).

    LED Pre-Wired Class 2 Driver 100W 24VDC

    $48.40

    This regulated 24VDC 100W Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.


    This LED driver convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 24V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • Class II Double Insulation
    • UL Listed, CE and FCC approved

    LED Pre-Wired Class 2 Driver 100W 12VDC

    $48.40

    This regulated 12VDC 100W Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.


    This LED driver convert the AC input voltage to 12VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 12V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • Class II Double Insulation
    • UL Listed, CE and FCC approved

    LED Pre-Wired Class 2 Driver 60W 12VDC

    $34.00

    This regulated LED Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.


    This LED driver convert the AC input voltage to 12VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 12V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • Class II Double Insulation
    • UL Listed, CE and FCC approved

    LED Pre-Wired Class 2 Driver 60W 24VDC

    $34.00

    This regulated LED Pre-Wired Class 2 Driver is ideal for powering all of your LED lighting applications. The ultra low profile design allowing you to conceive it in small spaces or recessed.


    This LED driver convert the AC input voltage to 24VDC output. By means of the male DC plug on the output side of the driver, it allows you to easily connect power to your 24V LED Tape Light or Puck Light Kit.


    Our LED Pre-wired Driver is truly Plug N Play. While the driver is rated to accept maximum load for optimum performance, we recommend that you derate your driver by 20% through eliminating all error of overloading or overheating.


    The simple formula Driver Load x 0.8 = Recommended Driver Wattage should be applied for optimum lighting performance which accounts for environmental factors such as power surges and temperature fluctuations.


    Features:
    • Efficient and reliable switching driver
    • Class II Double Insulation
    • UL Listed, CE and FCC approved

    LED High Output Cut Off Wall Pack Light 45W

    $156.80
    The LED High Output Cut Off Wall Pack Light 45W fixture provides brilliant lighting and is an efficient, energy-saving replacement for metal halide and high pressure sodium fixtures. With the glare lens shield attached, this fixture is maintenance-free. The high-performance LEDs are powered by a multi-volt 120V-277V LED driver that uses 45 watts input and produces 4800 lumens. This LED wall pack light is ideal for parking structures, overnight security, building entrances, and overhead door lighting applications.

    • • Lens made of high-quality, shatter-resistant prismatic glass
    • • Effective 20 to 35 ft height performance
    • • Long lifespan of 50,000 hours
    • • Instant Start Electronic Unit

    New products

    ... ...