-Diverse color chasing effects: smooth, flash, meteor, fade in/out, speed up/down; features in dual-white color; impressive high quality LED component
-Flexible and resizable: flexible PCB material comes with a weatherproof silicone coating; bend to fit curve surface
-Resizable: each 6 LEDs(as a segment) and rejoined by a simple solder or a quick connector
-3M adhesive back: very easy to work with, self-adhesive backing; Easy-to-connect 4-conductor ribbon
-Great value complete kit: includes LEDs strip, IR remote control, controller and UL-certified power adapter; plug-n-play light kit, no other component needed
Feature in multiple chasing effects
This strip light features in multiple chasing effects that rarely seen in the similar products. Color effects include but not limited to the following:
-All color or less colors chasing from left to right, right to left
-All color or less colors flow from two terminals to center and from center to two terminals
-All color or less colors trail into left or right or two directions in turn
-All color or less colors spread to left or right
-All colors in jump, flash, queued, auto-cycle mode
The easy-plug 4-pin end on our LED can be easily hooked up to controller and the UL-listed power adapter that are included in the combo. 3M self-adhesive tape on the back; Cuttable every 6 LEDs (marked intervals) and reconnected by a simple solder or our easy connector. The flexible RGB LED light fits well into customized installations and is perfect for display cases, etc.
The Flexible Chasing LED Light Strip has low-voltage that produces little heat, which makes the strip safe to touch so you do not have to worry about shock or fire danger. It has a lifespan of over 50,000 hours, extremely low power consumption which is great for the environment and your electric bill!
This weatherproof RGB strips light rating is IP-65, can be used in an outside setting and are water-resistant. It is a perfect solution for indoor and outdoor projects including garden lights, porches, decks, patio areas, etc.
Wireless IR controller (with the DIY feature)
This 24-key IR remote allows you to create stunning light effects that are limited only by your imagination! By aiming the remote to the controller’s receiver, it will respond to the controller within 5-meter in a line. The Infrared Remote Control allows you to choose different sets of colors, adjust the brightness & select from 10 different chasing effects!
There is a DIY button on the remote which allows you to create your favorite color and save it to your controller! Firstly pressing the IC Set button, which will make the controller into the DIY color mode; you can now adjust the color with the up & down arrow keys to increase or decrease the red, green, and blue to create your unique color. Press the IC set key again to save it to your controller. That specific color will show up when the IC key is pressed again after the power cycle.