Close
0 items
You have no items in your shopping cart.
OUR LED PRODUCTS
    Filters
    Preferences
    Search

    Color Changing Tape Light Accessories

    Shop our selection of Accessories for RGB LED Tape Lights at Step 1 Dezigns. Please give us a call at 949.270.0250 or email [email protected] if you have any questions about our products.

    View as Grid List
    Sort by

    RGB LED 24-key Infrared Controller with Remote

    STVO12RGB-KTCON
    $12.25
    The RGB LED 24-key Infrared Controller with Remote comes with the most advanced micro control unit. It is compatible with our 12V RGB LED Tape Light Strips. It is easy to install with Plug N Play connector and easy to use. For instance, you could change the color of the LED light by pressing one of the 16 color buttons. The light will also rotate through preprogrammed colors when the Flash, Strobe, Fade, and Smooth buttons are pressed. The two buttons in the top left corner of the remote controls both the brightness of a selected color and the speed of the Flash, Strobe, Fade, and Smooth modes.

    RGB Controller with Remote

    STDCRGB-RMT
    $91.00
    The RGB Controller with Remote contains nine pre-programmed color-moving sequences, including speed adjustment and pause features. Includes hand held remote. 12VDC or 24VDC Power Supply Required (not included).

    • • Use wireless remote within 100 feet, or control manually by the keys on the controller panel
    • • Three channel RGB control. Max 6A each channel
    • • Up to 31 changing modes to select, 256 grey level changing
    • • Each mode can select changing speed and overall brightness separately
    • • Level brightness and speed adjustment
    • • Change and Pause function
    • • Mode, suspend protection and memory function
    • • Soft switch function

    RGBW LED Rotary Knob Controller with Remote

    EL-R-RGBW-12-24
    $81.00
    The RGBW LED Rotary Knob Controller with Remote is easy to install and use. It is designed perfectly for Step 1 Dezigns RGB or RGBW LED tape lights, led modules, etc.

    RGBW Touch Controller with Remote

    STVOFLRGB/W-CON
    $29.68
    The RGBW Touch Controller is easy to install and use. It is perfectly designed for Step 1 Dezigns RGB or RGBW LED tape and strip lights, mixing RGB and white. The RGBW Touch Controller with Remote Unit contains 12 dynamic modes, 8 dimming scales, 8 dimming speeds and comes with remote.

    RGBW Data Repeater

    STVOFLRGB/W-DR
    $31.25
    The RGBW data repeater is required for runs which exceed the wattage of the initial driver. An additional driver in conjunction with the repeater is required to power extended runs. Power supply required (not included).

    RGB LED 4 Pin Direct Connector Plug

    STVO12RGB-4PCON
    $0.29
    LED RGB 4 Pin Director Connector Plugs for RGB LED Strip Lights. Easy plug n play connector between led strip and remote controller. Made of high-quality cooper electroplated material.

    RGBW LED 5 Pin Direct Connector Plug

    STVO12RGBW-5PCON
    $0.29
    LED RGBW 5 Pin Director Connector Plugs for RGBW LED Strip Lights. Easy plug n play connector between led strip and remote controller. Made of high-quality cooper electroplated material.

    RGB LED Extension Cable

    STVO12RGB-EXT
    $4.95
    The RGB LED 4 Pin Female to Female Extension Cable is available in 72" length. This kit includes 2 Direct 4 Pin connector plugs. Perfect solution for connecting and extending RGB LED strip lights. Easy plug n play installation allows LED strips connecting with controller or strip to strip connection.

    RGB LED Y Splitter Cables

    ST-12RGB-xY
    $4.19
    10" RGB LED Y Splitter Cable and Direct Connector Pins for RGB LED Light Strips with 4-Pin Direct Connector Plugs. This DC Power Adapter Cable splits 1 power signal into 2, 3, or 4 ways. It enables you to connect multiple color changing RGB LED strips to a single controller. Power supply with sufficient amperage is required. The kit includes 1 RGB LED splitter Cable with female connectors and male 4-pin direct connector plugs. Available in 2 way, 3 way, 4 way splitter cable options.

    RGBW LED Y Splitter Cables

    ST-12RGBW-xY
    $4.95
    10" RGBW LED Y Splitter Cable and Direct Connector Pins for RGB LED Light Strips with 5-Pin Direct Connector Plugs. This DC Power Adapter Cable splits 1 power signal into 2 or 4 ways. It enables you to connect multiple color changing RGBW LED strips to a single controller. Power supply with sufficient amperage is required. The kit includes 1 RGBW LED splitter Cable with female connectors and male 5-pin direct connector plugs. Available in 2 way or 4 way splitter cable options.

    RGB LED Flexible Tape Light X Connector

    STVOFLRGBX or STVOFLRGBX1
    $11.19
    The 4-Way Connector is for use with LED RGB tape light. Can be cut and used as a T or L Connector. Available in STVOFLRGBX (1 x female and 3 x male connections) or STVOFLRGBX1 (4 Female connections).

    RGB Tape Jumper

    STVOFLRGBO6
    $8.68
    The RGB Tape Jumper is compatible with our 8mm width LED RGB Tape Ribbon Light.

    RGB Tape Male Power Feed

    STVOFLRGBC
    $9.95
    The RGB Tape Male Power Feed is compatible with 8mm width LED RGB Tape Ribbon Light.

    RGB Tape Female Power Feed

    STVOFLRGBF
    $9.95
    The RGB Tape Female Power Feed is compatible with 8mm width LED RGB Tape Ribbon Light.

    RGB LED Male/Female Power Feed

    STVO12RGB-M/FM
    $4.95
    The 24" RGB LED Male or Female 4-Pin Connector Power Feed is compatible with our LED RGB tape light. Available with male or female plug options. 22AWG wire gauge and made of PVC plastic & metal.

    LED RGB CLIPTIGHT Splice Power Feed

    STVO12PF-RGB-10
    $4.95
    LED RGB CLIPTIGHT Splice Power Feed is easy to use with LED RGB Tape Light systems. The 10mm Power Clip Connector with 5.5" Splice Power Feed allows the LED RGB tape light to insert into the connector and seat properly under the terminals. Solderless clip connector allows for easy configuration of your LED RGB Tape Lighting system.

    LED RGB CLIPTIGHT Jumper

    STVO12J-RGB-10
    $4.95
    LED RGB CLIPTIGHT Jumper is easy to use with LED RGB Tape Light systems. The 10mm Power Clip Jumper allows the LED RGB tape light to insert into the connector and seat properly under the terminals. Solderless clip connectors allow for easy configuration of your LED RGB Tape Lighting system.

    LED RGB CLIPTIGHT Direct Connector

    STVO12DC-RGB-10
    $4.95
    LED RGB CLIPTIGHT Splice Power Feed is easy to use with LED RGB Tape Light systems. Directly connect two pieces of 10mm RGB LED tape light together with the direct connector. The 10mm Power Clip allows the LED RGB tape light to insert into the connector and seat properly under the terminals. The solderless direct connector allows for easy configuration of your LED RGB Tape Lighting system.

    RGBW LED Male/Female Power Feed

    STVO12RGBW-M/FM
    $4.95
    The 6" RGBW LED Male or Female 4-Pin Connector Power Feed is compatible with our LED RGBW tape lights. Available with male or female plug options. 22AWG wire gauge and made of PVC plastic & metal.

    RGBW LED Flexible Tape Light 5-Wire 8 in. Power Feed

    STVOFLRGB/W-PF
    $4.94
    The 8" Length RGB LED Flexible Tape Light 5-Wire Power Feed is compatible with LED RGB+W tape light.

    RGBW LED Connector Extension Wires with 5-Pin Connector

    STVOFLRGB-W-J
    $4.95
    5 Pin RGBW LED Connector Extension Wire with 5 Pin Connector includes 2 extension wires and 1 connector for RGBW LED Flexible Tape Lights.

    Color Changing Tape Light Accessories