Skip to content
LED Waterproof Standard Tape Lights 12V DC 16 ft Reel - Step 1 Dezigns

LED Waterproof Standard Tape Lights 12V DC 16 ft Reel

SKU EL-FS-60K-16-12
$43.68 - $43.68
$43.68
$43.68 - $43.68
$43.68

LED 12V Waterproof Standard Flexible Tape Lights are made with commercial-grade IP65 wet location protection PCB strip. Featuring 85+ CRI with high consistency and even illumination. It is perfect for a wide variety of lighting applications such as trade shows, exhibitions, and retail displays. It gives you the freedom to easily design and install lighting for almost any indoor or outdoor environment. 

The LED Waterproof Standard Tape Light is fully dimmable when used with LED Dimmable Drivers, see related products. It is UL listed to ensure the durability and safety of the LED tape light lifespan. 

The LED Strip Lights are made with wire leads on the ends of each 16 ft reel and can be cut every 2 inches at its cut marking points, allowing you to cut pieces to the length desired.

* Required: Requires a non-dimming or dimming 12 volt DC driver.

Key Features

  • Rated IP65 for Wet Locations
  • Maintenance-free and Energy Efficient
  • Easy and Flexible Installation
  • Solid-State Construction
  • High shock and Vibration Resistance
  • SMD 5050 LED Chips are high intensity, ultra-bright
  • No RF interference
  • Up to 50,000 hours Lifespan

Applications

  • Indoor or Outdoor Lighting
  • Decorative Lighting for Tradeshows, Exhibition, and Retail Displays
  • Architectural lighting for corridors, canopies, archways, or windows
  • Downlighting or Uplighting Applications
  • Backlighting or Edge-Lighting
  • Under-cabinet, Under-Counter, or cove lighting 
  • Custom DIY projects

Specifications

View Spec Sheet

  • Brightness: 144 Lumens/ft, 472.32 Lumens/meter
  • Power: 3.6 watt/ft, 11.81 watt/meter
  • Input Voltage: 12V DC
  • LED CCT & Colors: 6000K, 3000K, Red, Green, Blue
  • CRI: 85+
  • Environment: IP65 Wet Location
  • Beam Angle: 120°
  • LED Density: 18 LEDs/ft, 300 LEDs/reel
  • LED Chip Size: SMD 5050
  • LED Spacing: 0.66 in / 16.7 mm
  • Length: 16.4 ft / 5 meters long
  • Width: 0.40 in / 10mm wide
  • Height: 0.2 in / 5 mm thick
  • Cutting Increment: 2 in / 50.8 mm at its cut marking
  • Adhesive Backing: 3M Adhesive
  • Manufacturer: Elumalight
  • Rating: UL, ETL, RoHS
  • Avg. Lifetime: ± 30,000 - 50,000 hours
  • Warranty: 3 years limited
  • Power Supplies: 12V DC Drivers
  • Accessories: LED Tape Light Accessories