Skip to content
RGB LED Clip-On Splice Power Feed - step-1-dezigns

RGB LED Clip-On Splice Power Feed

SKU EL-12PF-RGB-10
$4.95 - $4.95
$4.95
$4.95 - $4.95
$4.95

LED RGB Clip-On Splice Power Feed is easy to use with LED RGB Tape Light systems. The 10mm Power Clip Connector with 5.5-inch Splice Power Feed allows the LED RGB tape light to insert into the connector and seat properly under the terminals.

Solderless clip connector allows for easy configuration of your LED RGB Tape Lighting system. The LED RGB Clip-On Splice Power Feed kit fits 5050 RGB LED Tape Lights with a 10mm width, 4-pin connection.

The connector end of the power feed is made from PBT heat resistant material, it protect the led strip from high temperature. No screw terminals, simply slide in the tape light and fold over the clip for a secure connection.

Specifications

  • Input Voltage: 12V or 24V DC
  • Clip-On Connector Sizes: 10 mm wide
  • Power Feed Length: 5.5 in
  • Power Feed Length (metric): 140 mm
  • Conductors: 4
  • Environment: Dry Location
  • Warranty: 1 year

Installation

1. Pop open the clip on the side.
2. Slide the 10mm LED RGB tape light inside the clip underneath the contact prongs.
3. Make sure the side of the LED Tape light aligns with the "+ -" polarity.
4. Fold over the connector clip.